MOXA TWS-3010-APL Series

SPHINX en Europe
FR
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • PL
  • ES
  • SE
  • CH
  • UK
Groupes de produits > Ethernet Switches > MOXA TWS-3010-APL Series

MOXA TWS-3010-APL Series

8 10MbE-APL-spur, 2 1GbE-port managed Ethernet switches

MOXA TWS-3010-APL Series
8605_38804.png
8605_38805.png
8605_38806.jpg
  • Les caractéristiquesLes caractéristiques
  • PrésentationPrésentation
  • Plus d'informationPlus d'information
  • PDFPDF
  • 8 802.3cg 10Base-T1L Ethernet-APL spur ports
  • Ethernet-APL power classes A and C on each spur port
  • Compact size for easy installation
  • RSTP/STP and MRP for network redundancy and high network availability
  • Supports EtherNet/IP, PROFINET, and Modus TCP industrial protocols for easy integration and monitoring in automation systems
  • Rotary DIP switch enables profile-based configuration selection without a web browser

The TWS-3010-APL Series industrial two-wire Ethernet switch brings reliable Ethernet connectivity to process industries at the field level. Complies with the Ethernet-APL Technical Specification.

With 10BASE-T1L technology and support for APL Power Classes A and C, the switch extends Ethernet communication to field devices. It delivers both power and data over a single twisted pair at data rates up to 10 Mbps and distances up to 1 km, simplifying installation, lowering wiring costs, and enabling more flexible field deployment.

Diagnostic functions and port-mirroring make deployment and troubleshooting a breeze. Compact chassis and front-facing ports make installation and maintenance easy in tight control cabinets. Industrial Ethernet protocols, like PROFINET, allow for seamless integration with existing systems, and provide scalability for future digitalization and IIoT expansion.


ProdGrafik

Specifications


Input/Output Interface
Alarm Contact Channels 1
Relay output with current carrying capacity of 1 A @ 24 VDC
Buttons Reset button
Digital Input Channels 1
Digital Inputs +13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
Ethernet Interface
Combo Ports
(10/100/1000BaseT(X) or 100/1000BaseSFP) 		2
Standards IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1X for authentication
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.3z for 1000BaseX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3ad for Port Trunk with LACP
IEEE802.3cg for 10Base-T1L
Ethernet-APL Spur Ports (10Base-T1L) 8
3-pin terminal block connectors
Ethernet-APL power classes A and C
Ethernet Software Features
Filter 802.1Q VLAN
BPDU Guard
BPDU Filter
GMRP
GVRP
IGMP v1/v2/v3
Port-based VLAN
Industrial Protocols EtherNet/IP
Modbus TCP
PROFINET IO Device
Management LLDP
Back Pressure Flow Control
BOOTP
Port Mirroring
DHCP Option 66/67/82
DHCP Server/Client
Fiber check
Flow control
IPv4/IPv6
RARP
RMON
SCP
SMTP
SNMP Inform
SNMPv1/v2c/v3
Syslog
Telnet
TFTP
MIB Ethernet-like-MIB
MIB-II
Bridge-MIB
P-BRIDGE MIB
Q-BRIDGE-MIB
RMON MIB Groups 1, 2, 3, 9
RSTP MIB
Redundancy Protocols Link Aggregation
MRP
MSTP
RSTP
STP
Security Broadcast storm protection
HTTPS/SSL
TACACS+
SNMPv3
Sticky MAC
NTP authentication
Port Lock
RADIUS
SSH
SMTP with TLS
Time Management NTP Server/Client
SNTP
Switch Properties
IGMP Groups 2048
MAC Table Size 8 K
Max. No. of VLANs 64
Packet Buffer Size 1 Mbits
Priority Queues 4
VLAN ID Range VID 1 to 4094
USB Interface
Storage Port USB Type A (for ABC-02 only)
LED Interface
LED Indicators PWR1, PWR2, STATE, FAULT, Gigabit combo port, Ethernet-APL spur port
Serial Interface
Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
Rotary Switch Configuration
Industrial Profile
Indicator Mode
0 No function enabled via DIP switch (Default)
1 PROFINET profile enabled
2 PROFINET profile and DHCP client enabled
3 EtherNet/IP profile enabled
4 EtherNet/IP profile and DHCP client enabled
5 Modbus TCP profile enabled
6 Modbus TCP profile and DHCP client enabled
7-9 Reserved (currently performs the same behavior as indicator 0)
Power Parameters
Connection 2 removable 2-contact terminal block(s)
Input Current 24 to 48 VDC, 1 A - 0.5 A (max.)
Input Voltage 24/48 VDC
Redundant dual inputs
Operating Voltage 20 to 60 VDC
Overload Current Protection Supported
Supported Supported
Physical Characteristics
Housing Metal
IP Rating IP30
Dimensions 133 x 135 x 111 mm (5.24 x 5.32 x 4.37 in)
Weight 1,452 g (3.20 lb)
Installation DIN-rail mounting
Wall mounting (with optional kit)
Environmental Limits
Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2,000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes
Standards and Certifications
Safety UL 61010-2-201
EN IEC 62368-1
EMC EN 61000-6-2/-6-4
EMI FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Level 3
IEC 61000-4-3 RS: Level 3
IEC 61000-4-4 EFT: Level 3
IEC 61000-4-5 Surge: Level 3
IEC 61000-4-6 CS: Level 3
IEC 61000-4-8 PFMF: Level 3
Vibration IEC 60068-2-6
IEC 60068-2-64
Shock IEC 60068-2-27
Freefall Freefall
MTBF
Time 2,063,466 hrs
Standards Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
Package Contents
Device 1 x TWS-3010-APL-8PS-2GC-T switch
Documentation 1 x quick installation guide
1 x warranty card
Note SFP modules need to be purchased separately for use with this product.




Ordering Information


Model Name Ethernet-APL Spur Ports
(10Base-T1L) 		Combo Ports 10/100/1000BaseT(X)
or 100/1000BaseSFP 		Operating Temp.
TWS-3010-APL-8PS-2GC-T 8 2 -40 to 75°C



Clients qui ont dájà consulté cet article ont également vu
Accepter

Ce site utilise des cookies pour offrir la meilleure expérience possible. Plus de détails.