MOXA NPort IA5000 Series
1 and 2-port serial device servers for industrial automation
- Socket modes: TCP server, TCP client, UDP
- Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
- Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors)
- Redundant DC power inputs
- Warnings and alerts by relay output and email
- 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC connector)
- IP30-rated housing
NPort® IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPort® IA device servers makes them an ideal choice for establishing network access to RS-232/422/485 serial devices such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. All models are housed in a compact, rugged housing that is DIN-rail mountable.
Cascading Ethernet Ports Make Wiring Easy (10/100BaseTX models)
The NPort® IA5150 and IA5250 device servers each have two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to either another NPort® IA device server or an Ethernet device. The dual Ethernet ports help reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.
Redundant Power Inputs
The NPort® IA5000 device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help assure that your device server will operate nonstop.
Relay Output Warning and Email Alerts
The built-in relay output can be used to alert administrators of problems with the Ethernet links or power inputs, or when there is a change in the DCD or DSR serial signals. The web console indicates which Ethernet link or power input has failed, or which serial signal has changed. An email warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.
Optical Fiber for Ethernet Communication
The NPort® IA5000 Series includes 100BaseFX fiber models that support transmission distances up to 5 km for multi-mode models, and up to 40 km for single-mode models. Optical fiber is well-suited for industrial applications because it is immune to electromagnetic noise and interference. For environments that experience high ground loop voltages, fiber provides the best isolation protection, and because there is no danger of sparking, optical fiber is safer than copper wire to use in hazardous environments.
Industrial-grade Certification
To ensure safe and reliable operation in industrial environments, the NPort® IA5000 device servers have obtained various industrial certifications, including an IP30 rating for mechanical protection, UL 508 safety certification for industrial control equipment, and explosion-safe certifications for hazardous locations. Certifications include UL/cUL Class 1 Division 2 Groups A, B, C, D, as well as ATEX Class 1 Zone 2, and IECEx Zone 2.
Specifications
- Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
2 (1 IP, Ethernet cascade, NPort IA-5150/5150I/5250/5250I)
Magnetic Isolation Protection
1.5 kV (built-in)
100BaseFX Ports (multi-mode SC connector)
NPort IA-5000-M-SC Models: 1
NPort IA-5000-M-ST Models: 1
100BaseFX Ports (single-mode SC connector)
NPort IA-5000-S-SC Models: 1
Ethernet Software Features
- Configuration Options
Web Console (HTTP), Windows Utility, Telnet Console, Serial Console
Management
DHCP Client, IPv4, SMTP, SNMPv1, Telnet, ARP, BOOTP, DNS, HTTP, TCP/IP, UDP, ICMP, Rtelnet
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0,
Windows XP Embedded
Linux Real TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15
Android API
Android 3.1.x and later
Time Management
SNTP
MIB
RFC1213, RFC1317
Serial Interface
- Connector
NPort IA-5150: DB9 male for RS-232 and terminal block for RS-422/485
NPort IA-5250: DB9 male for RS-232/422/485
No. of Ports
NPort IA-5150 Models: 1
NPort IA-5250 Models: 2
Serial Standards
RS-232, RS-422, RS-485
Baudrate
Supports standard baudrates (unit=bps): 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230400
Data Bits
5, 6, 7, 8
Parity
None, Even, Odd, Space, Mark
Stop Bits
1, 1.5, 2
Flow Control
RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
Terminator for RS-485
120 ohms
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Isolation
2 kV (I models)
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Power Parameters
- Input Voltage
12 to 48 VDC
Input Current
NPort IA-5150/IA-5150-T/IA-5250/IA-5250-T: 435 mA @ 12 VDC
NPort IA-5150I/IA-5150I-T/IA-5150-S-SC/IA-5150-S-SC-T/IA-5150I-M-SC/IA-5150I-M- SC-T/IA-5150I-S-SC/IA-5150I-S-SC-T: 555 mA @ 12 VDC
NPort IA-5250I/IA-5250I-T/IA-5150-M-SC/IA-5150-M-SC-T/IA-5150-M-ST/IA-5150-M-ST-T: 510 mA @ 12 VDC
No. of Power Inputs
2
Power Connector
Terminal block
Relays
- Contact Current Rating
Resistive load: 1 A @ 30 VDC
Physical Characteristics
- Housing
Plastic
IP Rating
IP30
Dimensions
29 x 89.2 x 118.5 mm (0.82 x 3.51 x 4.57 in)
Weight
NPort IA-5150: 360 g (0.79 lb)
NPort IA-5250: 380 g (0.84 lb)
Installation
DIN-rail mounting
Environmental Limits
- Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
- EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11
Safety
IEC 60950-1, EN 60950-1, EN 62368-1, UL 508
Maritime
DNV
Hazardous Locations
ATEX, Class I Division 2, IECEx
Freefall
IEC 60068-2-32
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6, IEC 60068-2-64
Declaration
- Green Product
RoHS, CRoHS, WEEE
MTBF
- Time
NPort IA-5150/IA-5150I Models: 1,349,710 hrs
NPort IA-5150-M-SC/M-ST/S-SC Models: 1,175,887 hrs
NPort IA-5150I-M-SC Models 768,343 hrs
NPort IA-5150I-S-SC Models: 763,707 hrs
NPort IA-5250/IA-5250I Models: 1,236,384 hrs
Standards
Telcordia (Bellcore) Standard TR/SR
Package Contents
- Device
1 x NPort IA-5000 Series device server
Documentation
1 x quick installation guide
1 x warranty card
Ordering Information
Model Name | No. of Ethernet Ports | Ethernet Port Connector | Operating Temp. | No. of Serial Ports | Serial Isolation |
---|---|---|---|---|---|
NPort IA-5150 | 2 | RJ45 | 0 to 60°C | 1 | - |
NPort IA-5150-T | 2 | RJ45 | -40 to 75°C | 1 | - |
NPort IA-5150-M-SC | 1 | Multi-mode SC | 0 to 60°C | 1 | - |
NPort IA-5150-M-SC-T | 1 | Multi-mode SC | -40 to 75°C | 1 | - |
NPort IA-5150-M-ST | 1 | Multi-mode ST | 0 to 60°C | 1 | - |
NPort IA-5150-M-ST-T | 1 | Multi-mode ST | -40 to 75°C | 1 | - |
NPort IA-5150-S-SC | 1 | Single-mode SC | 0 to 60°C | 1 | - |
NPort IA-5150-S-SC-T | 1 | Single-mode SC | -40 to 75°C | 1 | - |
NPort IA-5250 | 2 | RJ45 | 0 to 60°C | 2 | - |
NPort IA-5250-T | 2 | RJ45 | -40 to 75°C | 2 | - |
NPort IA-5150I | 2 | RJ45 | 0 to 60°C | 1 | 2 kV |
NPort IA-5150I-T | 2 | RJ45 | -40 to 75°C | 1 | 2 kV |
NPort IA-5150I-M-SC | 1 | Multi-mode SC | 0 to 60°C | 1 | 2 kV |
NPort IA-5150I-M-SC-T | 1 | Multi-mode SC | -40 to 75°C | 1 | 2 kV |
NPort IA-5150I-S-SC | 1 | Single-mode SC | 0 to 60°C | 1 | 2 kV |
NPort IA-5150I-S-SC-T | 1 | Single-mode SC | -40 to 75°C | 1 | 2 kV |
NPort IA-5250I | 2 | RJ45 | 0 to 60°C | 2 | 2 kV |
NPort IA-5250I-T | 2 | RJ45 | -40 to 75°C | 2 | 2 kV |
Clients qui ont dájà consulté cet article ont également vu