SPHINX CONNECT - Advantech EKI-1528I-DR & EKI-1528CI-DR

Advantech EKI-1528I-DR & EKI-1528CI-DR

8-port RS-232/422/485 Device Server

Les caractéristiques
Présentation
Plus d'information
PDF

Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
Provides COM port redirection (Virtual COM), TCP and UDP operation modes
Supports up to 921.6 kbps, and any baud rate setting
Allows a max. of 5 hosts to access one serial port
Allows a max. of 16 hosts to be accessed as TCP client mode
Built-in 15 KV ESD protection for all serial signals
Provides rich configuration methods including Windows utility, Telnet console, and Web Browser
Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012/2016, Windows CE 5.0, and Linux
Automatic RS-485 data flow control
Supports line to line 4 KV, line to ground 8 KV surge protection
'I' models support a wide operating temperature
'CI' models support isolation and wide operating temperature

The EKI-1528I and EKI-1528CI feature two independent Ethernet Ports and MAC adresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528I and EKI-1528CI are serial device server that connect RS-232/422/485 serial devices,such as PLC, meters,sensors and barcode reader to an IP- based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet Network. The EKI-1528i and EKI-1528CI provide various operations: COM port redirection (Virtual COMport), TCP Server TCP Client and UDP Mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1528I and EKI-1528CI,guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP Server, TCP Client and UDP modes, EKI-1528I and EKI-1528CI ensure the compatibility of network software that uses a standard network API. Moreover you can make serial devices peer-to-peer, without any intermediate host PCs and software programming.

Specifications

Ethernet Communications

Compatibility	IEEE 802.3, IEEE 802.3u
Speed	10/100 Mbps
No. of Ports	2
Port Connector	8-pin RJ45
Protection	Built-in 2,25 kV DC magnetic isolation

Serial Communications

Port Type	RS-232/422/485, software selectable ("CI" Model supports RS-422/485)
No. of Ports	8
Port Connector	DB9 male
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	Noen, Odd,Even, Space, Mark
Flow Control	XON/XOFF, RTS/CTS, DTR/DSR
Baud Rate	50 bps ~ 921,6 kbps, any baud rate setting
Serial Signals	RS-232: TxD, RxD, CTS,RTS,DTR,DSR,DCD,RI, GND RS-422: TxD+, TxD-,RxD+,RxD-,GnD RS-485: Data+, Data-, GND
Pretection	Built-in 15KV ESD for all signals

Software

Driver Support	32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1 Windows Server 2003/2008/2012, Windows CE5.0 and Linux
Operation Modes	COM port redirection mode(Virtual COM) TCP/UDP server (polling)mode TCP/UDP client (event handling) mode Pair Connection (peer to peer)mode
Configuration	Windows utility, Telnet console, Web Browser
Management	SNMP MIB-II

Mechanics

Dimensions (WxHxD)	86x140x95mm(3,38"x5,51"x3,74")
Enclosure	Metal with solid mounting hardware
Mounting	DIN-rail, Wall
Weight	EKI-1528I:900G/EKI-1528CI:1000g

General

LED Indicators

System: Power, System Status/LAN: Speed, link/Active
Serial: Tx, Rx

Power Requirements

Input	12 ~ 48V DC, redundant dual input
Connector	Termial block
Consumption	EKI-1528I: 5W EKI-1528CI: 6W

Environment

Operating Temperature	-40 ~ 70°C(-40 ~ 158°F)
Storage Temperature	-40 ~ 85°C (-40 ~ 185°F)
Operating Humidity	10 ~ 95% RH

Regulatory Approvals

EMC	CE, FCC Part 15 Subpart B (Class A)

Port to Port Isolation ("CI"models)

Serial to Ethernet	2,25kV DC
Serial to Power	2kV DC
Ethernet to Power	2,25kV DC

Ordering Information

EKI-1528I-DR	8-port RS-232/422/485 Serial Device Server with Wide Temp.
EKI-1528CI-DR	8-port RS-422/485 Serial Device Server with Wide Temp and Isolation

Advantech EKI-1528I-DR & EKI-1528CI-DR Datasheet (538.0 kB)

Clients qui ont dájà consulté cet article ont également vu