ADDER CATx DisplayPort CAM

SPHINX en Europe
FR
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Groupes de produits > Computer Interface Modules (CIM) & CAM > ADDER CATx DisplayPort CAM

ADDER CATx DisplayPort CAM

DisplayPort, Mini DisplayPort, USB and Audio Computer Access Module

ADDER CATx DisplayPort CAM
5102_13103.png
5102_11807.jpg
5102_11808.jpg
5102_11809.jpg
5102_11816.png
5102_11817.jpg
5102_11818.jpg
5102_11819.jpg
5102_11820.jpg
5102_11826.jpg
5102_11827.jpg
  • Les caractéristiquesLes caractéristiques
  • PrésentationPrésentation
  • Plus d'informationPlus d'information
  • PDFPDF
  • Ideal for CAT5/6/7 cable
  • SUN compatible
  • PC compatible
  • Mac compatible
  • DisplayPort interface
  • USB interface
  • RJ45 interface
  • Audio connectivity
The CATX Displayport Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters.

TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView CATx KVM switches and/or Adder extender receivers (either AdderLink X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers arethen all linked to the remote device.


FEATURES

    Resolutions and cable lengths
    The maximum resolutions achievable are:
    1920 x 1200 x 60Hz at 200m
    1280 x 1024 x 60Hz at 300m.

    Power
    The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector

    Mini DisplayPort version available
    Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. A version of the CAM is available with Mini DisplayPort connectors.

    EDID display information
    The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.

    USB
    The CAM supports low speed (1Mb/s) HID USB devices only.

    Audio
    2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.


ProdGrafik

TECHNICAL SPECIFICATIONS

    Maximum Video Resolution
      1920 x 1200


    Extension Distance
      1920 x 1200 x 60Hz at 200m
      1280 x 1024 x 60Hz at 300m.


    O/S Compatability
      Operating system independent


    Connectors
      1 x Display Port,
      1 x USB- Type A plug,
      1 x 3.5 mm jack plug and 1 x RJ45
      1 x Mini Display Port,
      1 x USB- Type A plug,
      1 x 3.5 mm jack plug and 1 x RJ45 (CATX-MDP-USBA)


    Physical design
      Local:
      Hi Impact resistance ABS, 45mm /1.75’’ (w) x 75mm / 3’’(d) x 25mm / 1’’ (h) with 300mm/12’’ flying leads
      Weight
      100g / 0.2 lb.


    Power
      USB powered device Max 500mA @ 5V


    Operating temperature
      0ºC to 40º / 32ºF to 104ºF


    Approvals
      CE, FCC


ORDERING INFORMATION

CATX-DP-USBA DisplayPort CAM with USB & Audio
CATX-MDP-USBA Mini DisplayPort CAM with USB & Audio
Standard Single CAM range:
  • Serial CAMs
CATX-CONSOLE Serial interface
  • PS/2 CAMs
CATX-PS2 PS/2 only
CATX-PS2-A PS/2 plus audio
  • USB CAMs
CATX-USB USB only
CATX-USB-A USB plus audio
  • Sun CAM
CATX-SUNA Sun plus audio
  • Dual Access CAM Range
CATX-USB-DA Dual CAM
CATX-USBA-DA Dual CAM with audio
Clients qui ont dájà consulté cet article ont également vu
Accepter

Ce site utilise des cookies pour offrir la meilleure expérience possible. Plus de détails.