SPHINX en Europe «  ch es uk de at dk it nl be be  «
Tél: +33 (0)2 5109 2660 |  Mentions légales |  Nous Contacter |  E-mail Merci de cliquer ici |  FAQ

Vous êtes ici « Options » ADDER ADDERLink XD150 »


DVI video extender with transparent USB2.0 over a single CATx cable

Fonctionnalités et Avantages


ADDERLink XD150 is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the original user desktop experience.

Perfect digital video, real time control
The video extension system is uncompressed, where by every pixel of every frame are sent without loss and in real-time.

Single CATx extension cable
Video, USB 2.0, audio and RS232 signals all pass along a single CATx extension cable.

Up to 150 meter extension distance
Distance is dependent on the monitor resolution, cable type and number of connection breaks for patch panels and wall plates. See the table on reverse for details.

Transparent USB 2.0
The transparent USB 2.0 link supports most common USB devices such as mice, keyboards, touch screens, graphic tablets, jog shuttles, joysticks and mass storage devices. Isochronous devices such as web cams and headsets can also be used.

Plug and Play
Installation is straightforward and there is no need for extra drivers or software to be installed.

Locking power connectors
Locking 3 Pin DC jack with 2 power adaptors included.

CD quality analog audio
CD audio quality (stereo channel 16 bit sampled at 44.1kHz) is available to transfer stereo audio from local to remote for Line Out.

Intelligent operation
The extender has an intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer. A KVM switch mode is also provided for improved compatibility with KVM equipment. The whole system is flash upgradeable from the computer end for future compatibility.

RS232 can be passed between the units to a maximum baud rate 115K2 via the options port. Adder’s RC4 remote key switch is also supported.

19” rack mounting kit
An easy-access rack mount kit is available for neat mounting of two units in 1U of rack space.

Intelligent USB hub
The remote unit has an in-built 4-port USB hub to enable several USB devices to be connected.


Plus d'information

Hardware compatibility
All computers with DVI, USB and audio.

DVI Interface
The system supports resolutions to a maximum of 1920 x1200@60Hz.

USB 2.0
Supports USB 2.0 devices (low, full and hi-speed). Isochronous devices are supported.

Software compatibility
All known operating systems.

Computer connections LOCAL transmitter
DVI , audio 3.5mm in, USB type B, RS232 10p10c options port, mini USB for firmware upgrade.

Peripheral connections REMOTE receiver
DVI, audio 3.5mm out, USB type A x 4, RS232 10p10c options port.

Physical design
Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.

3 Pin Locking DC jack (2 x power adapter included),100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter.

Operating temperature
0 to 40ºC / 32 to 104ºF.



Fiche technique ADDER ADDERLink XD150 (717.8 kB)

Fiche technique ADDER ADDERLink XD150 Introduction (ger) (272.3 kB)

Copyright © 2013 SPHINX Computer Vertriebs-GmbH

CGV Déclaration de protection de données vers le haut Cookie directive SPHINX en Europe A propos de Sphinx

J'ai compris

Ce site utilise des cookies.
En utilisant ce site Web, vous acceptez que des cookies soient installés. Plus de détails.