MOXA NPort 6600 Series
8, 16, and 32-port RS-232/422/485 rackmount terminal servers
- Up to 32 ports for high density environments
- Non-standard baudrates supported with high precision
- Port buffers for storing serial data when the Ethernet is off-line
- Supports IPv6
- Ethernet redundancy (STP/RSTP/Turbo Ring) with network module
- Modular design for scalability
- DES/3DES/AES for highly secure data transmissions
- Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
- Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
The NPort® 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort® 6600 ensures data transmission integrity with support of DES, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort® 6600, and each serial port on the NPort® can be configured independently for RS-232, RS-422, or RS-485 transmission.
LCD Panel Makes Configuration Easy
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Note: The LCD panel is only available with standard temperature models.
Adjustable Resistor Values for RS-485 Communication
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
LCD Panel Makes Configuration Easy
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Note: The LCD panel is only available with standard temperature models.
Adjustable Resistor Values for RS-485 Communication
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
Ethernet Interface
- Number of Ports
1
Speed
10/100 Mbps, auto MDI/MDIX
Connector
8-pin RJ45
Magnetic Isolation
1.5 kV built-in
Serial Interface
- Number of Ports
8, 16, or 32
Serial Standards
NPort 6610: RS-232
NPort 6650: RS-232/422/485
Connector
8-pin RJ45
RS-485 Data Direction Control
ADDC® (Automatic Data Direction Control)
Console Port
Dedicated RS-232 console port on rear panel (8-pin RJ45)
Serial Communication Parameters
- Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, DTR/DSR, XON/XOFF
Baudrate
50 bps to 921.6 kbps (supports nonstandard baudrates)
Pull High/Low Resistor for RS-485
1 kÙ, 150 kÙ
Terminator for RS-485
120 Ù
Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Memory Expansion Slot
- Slot Type
SD slot (supports up to 2 GB)
Software
- Network Protocols
ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE, HTTPS
Security Protocols
SSLv3, TLSv1.0/1.1/1.2
Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x
Management
SNMP MIB-II
IP Routing
Static, RIP-I, RIP-II
Operation Modes
- Standard
Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, Ethernet Modem, Printer, PPP, Disabled
Secure
Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH
Applications
- Terminal Sessions
8 sessions per port
Physical Characteristics
- Housing
Metal
Weight
NPort 6600-8: 3,460 g (7.63 lb)
NPort 6600-16: 3,580 g (7.89 lb)
NPort 6600-32: 3,600 g (7.94 lb)
Dimensions
Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in)
With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in)
Environmental Limits
- Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature
Standard Models: -40 to 75°C (-40 to 167°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
- Input Voltage
AC Models: 100 to 240 VAC
DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC), 110 VDC (88 to 300 VDC)
Input Current
AC Models:
- 140 mA @ 100 VAC (8 ports)
192 mA @ 100 VAC (16 ports)
285 mA @ 100 VAC (32 ports)
- 293 mA @ 48 VDC
200 mA @ 88 VDC
Alarm Contact
Relay output with current-carrying capacity of 1 A @ 24 VDC
Standards and Certifications
- Safety
UL 60950-1
EMC
EN 55022/24
EMI
CISPR 22, FCC Part 15B Class A
EMS
NPort 6600-8/16/32:
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
NPort 6600 48V models:
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
NPort 6650 HV models:
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Freefall
IEC-68-2-6, IEC-68-2-34, IEC-68-2-32
Vibration
IEC-68-2-6, IEC-68-2-34
Green Product
RoHS, CRoHS, WEEE
Transportation
NEMA TS2
Reliability
- Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
- Time
NPort 6610-8: 135,891 hrs
NPort 6610-16: 102,373 hrs
NPort 6610-32: 68,707 hrs
NPort 6650-8: 636,600 hrs
NPort 6650-16: 439,673 hrs
NPort 6650-32: 310,078 hrs
NPort 6650-8-HV-T: 501,171 hrs
NPort 6650-16-HV-T: 380,006 hrs
NPort 6650-32-HV-T: 290,914
Standard
Telcordia (Bellcore) Standard
Available Models | |
NPort 6610-8 | 8-port RS-232 to Ethernet Secure Device Server, 100-240 VAC input |
NPort 6610-8-48V | 8-port RS-232 to Ethernet Secure Device Server, ±48 VDC input |
NPort 6610-16 | 16-port RS-232 to Ethernet Secure Device Server, 100-240 VAC input |
NPort 6610-16-48V | 16-port RS-232 to Ethernet Secure Device Server, ±48 VDC input |
NPort 6610-32 | 32-port RS-232 to Ethernet Secure Device Server, 100-240 VAC input |
NPort 6610-32-48V | 32-port RS-232 to Ethernet Secure Device Server, ±48 VDC input |
NPort 6650-8 | 8-port RS-232/422/485 to Ethernet Secure Terminal Server, 100-240 VAC input |
NPort 6650-8-T | 8-port RS-232/422/485 to Ethernet secure terminal server, -40 to 75°C operating temperature, 100-240 VAC input |
NPort 6650-8-HV-T | 8-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85°C operating temperature |
NPort 6650-8-48V | 8-port RS-232/422/485 to Ethernet Secure Terminal Server, ±48 VDC input |
NPort 6650-16 | 16-port RS-232/422/485 to Ethernet Secure Terminal Server, 100-240 VAC input |
NPort 6650-16-48V | 16-port RS-232/422/485 to Ethernet Secure Terminal Server, ±48 VDC input |
NPort 6650-16-T | 16-port RS-232/422/485 to Ethernet secure terminal server, -40 to 75°C operating temperature, 100-240 VAC input |
NPort 6650-16-HV-T | 16-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85°C operating temperature |
NPort 6650-32 | 32-port RS-232/422/485 to Ethernet Secure Terminal Server, 100-240 VAC input |
NPort 6650-32-48V | 32-port RS-232/422/485 to Ethernet Secure Terminal Server, ±48 VDC input |
NPort 6650-32-HV-T | 32-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85°C operating temperature | Optional Accessories
|
NM-TX02 | 2 10/100Base TX port |
NM-TX02-T | 2 10/100Base TX port, -40 to 75°C operating temperature |
NM-TX01 | 1 10/100Base TX port |
NM-TX01-T | 1 10/100Base TX port, -40 to 75°C operating temperature |
NM-FX01-M-SC | 1 100BaseFX port, multi mode, SC connector |
NM-FX01-M-SC-T | 1 100BaseFX port, multi mode, SC connector, -40 to 75°C operating temperature |
NM-FX01-S-SC-T | 1 100BaseFX port, single mode, SC connector, -40 to 75°C operating temperature |
NM-FX01-S-SC | 1 100BaseFX port, single mode, SC connector |
NM-FX02-M-SC | 2 100BaseFX ports, multi mode, SC connector |
NM-FX02-M-SC-T | 2 100BaseFX ports, multi mode, SC connector, -40 to 75°C operating temperature |
NM-FX02-S-SC | 2 100BaseFX ports, single mode, SC connector |
NM-FX02-S-SC-T | 2 100BaseFX ports, single mode, SC connector, -40 to 75°C operating temperature |
NM-modem-T | 1 PSTN modem port with RJ11 connector, -40 to 75°C operating temperature |
Clients qui ont dájà consulté cet article ont également vu